Volvo S80 1.6D 109 hp — Stage 1 file (+31 hp)
hp
Stage 1 file for Volvo S80 1.6D 109 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo S80 1.6D 109 hp ECU
Volvo S80 (2006) 1.6D 109 hp — premium diesel engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 109 to 140 hp (+31 hp, +28%) and torque from 240 to 305 Nm (+65 Nm). ECU — Bosch EDC16C35. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2006 — the era of classic Common Rail without strong encryption.
Polestar is Volvo's performance division, and a standalone brand since 2017. The Volvo range comprises premium saloons, estates and crossovers (SPA and CMA platforms). Volvo shares platforms and engines with Geely and Polestar. Mid-range Volvo diesels are a mainstream chip tuning subject in Scandinavia. DPF/SCR with AdBlue is standard on Euro-6 Volvo diesels. The Volvo D5 (legacy V6) was an iconic premium-segment engine of the 2000s.
Stage 1 on Volvo diesels delivers a noticeable torque gain. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. Polestar Optimization provides official Stage files for Volvo from Polestar. Mid-range Volvo models are premium units with a conservative factory calibration, and Stage 1 preserves engine life.
Frequently asked questions
What is the Stage 1 effect on the Volvo S80 1.6D 109 hp?
Stage 1 for the Volvo S80 1.6D 109 hp adds +31 hp — power increases from 109 to 140 hp (+28%). Torque rises from 240 to 305 Nm (+65 Nm).
What does a Stage 1 remap of the Volvo S80 1.6D 109 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo S80 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +31 hp with no hardware changes.
What is the risk of Stage 1 on the Volvo S80 1.6D 109 hp?
A remap of the Volvo S80 1.6D 109 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volvo S80 1.6D 109 hp?
Stage 2 for the Volvo S80 1.6D 109 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Volvo S80 1.6D 109 hp use?
The Volvo S80 1.6D 109 hp is fitted with the Bosch EDC16C35 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Volvo S80 remain valid after Stage 1?
After remapping the Volvo S80, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo S80?
Reading and writing via OBD takes 25-30 minutes on the Volvo S80. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo S80?
Before Stage 1 the original of the Volvo S80 1.6D 109 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo S80 1.6D 109 hp cost?
The remap price for the Volvo S80 1.6D 109 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.