Volvo S60 Polestar (3.0) 350 hp — Stage 1 file (+70 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Volvo S60 Polestar (3.0) 350 hp ECU

Volvo S60 (2010) Polestar (3.0) 350 hp — premium petrol engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 350 to 420 hp (+70 hp, +20%) and torque from 500 to 630 Nm (+130 Nm). The 2010 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.

The Volvo range comprises premium saloons, estates and crossovers (SPA and CMA platforms). Volvo shares platforms and engines with Geely and Polestar. Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. The factory calibration on Volvo petrol engines is conservative. Polestar Engineered is Volvo's performance engine range. VEA is Volvo's modern modular petrol engine range.

The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. Top Volvo Polestar Engineered engines sit at the power ceiling of the Swedish premium segment.

Frequently asked questions

How much does the power of the Volvo S60 Polestar (3.0) 350 hp increase after Stage 1?

The Stage 1 gain for the Volvo S60 Polestar (3.0) 350 hp is 70 hp (+20%) over the stock 350 hp, for a total of 420 hp. Torque rises from 500 to 630 Nm (+130 Nm).

What is Stage 1 chip tuning for the Volvo S60?

Stage 1 chip tuning of the Volvo S60 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +70 hp with no hardware changes.

What is the Stage 1 potential of the Volvo S60 Polestar (3.0) 350 hp?

Stage 1 for the Volvo S60 Polestar (3.0) 350 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.

How much does Stage 2 add on the Volvo S60?

Stage 2 on the Volvo S60 Polestar (3.0) 350 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

What happens to the Volvo S60 warranty after chip tuning?

The factory warranty of the Volvo S60 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.

How long does remapping the Volvo S60 take?

On the Volvo S60 Polestar (3.0) 350 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.

Is the original file kept when chip tuning the Volvo S60?

Yes, the original ECU firmware of the Volvo S60 Polestar (3.0) 350 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.

What is the price of a Stage 1 remap for the Volvo S60?

Stage 1 for the Volvo S60 Polestar (3.0) 350 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno