Volvo S60 2.4 D 128 hp — Stage 1 file (+72 hp)
hp
Stage 1 file for Volvo S60 2.4 D 128 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo S60 2.4 D 128 hp ECU
Volvo S60 (2005) 2.4 D 128 hp — premium diesel engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 128 to 200 hp (+72 hp, +56%) and torque from 280 to 400 Nm (+120 Nm). In the CHIPOK database: 2 configurations. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Volvo is historically known for its engineering-led approach to safety and the environment. Volvo uses its own VEA (Volvo Engine Architecture) diesels. The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1. Mid-range Volvo diesels are a mainstream chip tuning subject in Scandinavia.
Stage 1 on Volvo diesels delivers a noticeable torque gain. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. Mid-range Volvo models are premium units with a conservative factory calibration, and Stage 1 preserves engine life. Polestar Optimization provides official Stage files for Volvo from Polestar.
Frequently asked questions
How much horsepower does Stage 1 add for the Volvo S60 2.4 D 128 hp?
The Stage 1 gain for the Volvo S60 2.4 D 128 hp is 72 hp (+56%) over the stock 128 hp, for a total of 200 hp. Torque rises from 280 to 400 Nm (+120 Nm).
What is Stage 1 chip tuning for the Volvo S60?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo S60 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +72 hp with no hardware changes.
What is the risk of Stage 1 on the Volvo S60 2.4 D 128 hp?
A remap of the Volvo S60 2.4 D 128 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volvo S60 2.4 D 128 hp?
Stage 2 on the Volvo S60 2.4 D 128 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volvo S60 remain valid after Stage 1?
After remapping the Volvo S60, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo S60?
Reading and writing via OBD takes 25-30 minutes on the Volvo S60. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo S60?
Before Stage 1 the original of the Volvo S60 2.4 D 128 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo S60 2.4 D 128 hp cost?
The remap price for the Volvo S60 2.4 D 128 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.