Volvo S40 2.4 D5 163 hp — Stage 1 file (+62 hp)
hp
Stage 1 file for Volvo S40 2.4 D5 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo S40 2.4 D5 163 hp ECU
Volvo S40 (2004) 2.4 D5 163 hp — premium diesel engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 163 to 225 hp (+62 hp, +38%) and torque from 340 to 460 Nm (+120 Nm). In the CHIPOK database: 2 configurations. The 2004 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Volvo is historically known for its engineering-led approach to safety and the environment. Polestar is Volvo's performance division, and a standalone brand since 2017. The Volvo range comprises premium saloons, estates and crossovers (SPA and CMA platforms). The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1. Mid-range Volvo diesels are a mainstream chip tuning subject in Scandinavia. DPF/SCR with AdBlue is standard on Euro-6 Volvo diesels.
Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. Stage 1 on Volvo diesels delivers a noticeable torque gain. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Mid-range Volvo models are premium units with a conservative factory calibration, and Stage 1 preserves engine life. Polestar Optimization provides official Stage files for Volvo from Polestar.
Frequently asked questions
How much does the power of the Volvo S40 2.4 D5 163 hp increase after Stage 1?
The Stage 1 gain for the Volvo S40 2.4 D5 163 hp is 62 hp (+38%) over the stock 163 hp, for a total of 225 hp. Torque rises from 340 to 460 Nm (+120 Nm).
What is Stage 1 chip tuning for the Volvo S40?
Stage 1 on the Volvo S40 2.4 D5 163 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +62 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.4 D5 163 hp?
Stage 1 on the Volvo S40 2.4 D5 163 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Volvo S40 2.4 D5 163 hp?
Stage 2 on the Volvo S40 2.4 D5 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Volvo S40?
Stage 1 on the Volvo S40 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Volvo S40 2.4 D5 163 hp done?
The full remap cycle for the Volvo S40 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Volvo S40?
The original Volvo S40 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Volvo S40 2.4 D5 163 hp?
The cost of Stage 1 for the Volvo S40 2.4 D5 163 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.