Volvo FMX D11C 410 410hp (301kW) 1950Nm — Stage 1 file (+80 hp)
hp
Stage 1 file for Volvo FMX D11C 410 410hp (301kW) 1950Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo FMX D11C 410 410hp (301kW) 1950Nm ECU
Volvo FMX (I) D11C 410 410hp (301kW) 1950Nm — premium diesel engine of the commercial segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 410 to 490 hp (+80 hp, +20%) and torque from 1950 to 2340 Nm (+390 Nm).
The Volvo range comprises premium saloons, estates and crossovers (SPA and CMA platforms). Volvo shares platforms and engines with Geely and Polestar. Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo uses its own VEA (Volvo Engine Architecture) diesels. The Volvo D5 (legacy V6) was an iconic premium-segment engine of the 2000s. The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1.
The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. Top Volvo Polestar Engineered engines sit at the power ceiling of the Swedish premium segment.
Frequently asked questions
How much does the power of the Volvo FMX D11C 410 410hp (301kW) 1950Nm increase after Stage 1?
After Stage 1 the power of the Volvo FMX D11C 410 410hp (301kW) 1950Nm rises from 410 to 490 hp, a gain of 80 hp (+20%). Torque rises from 1950 to 2340 Nm (+390 Nm).
How does Stage 1 differ from stock on the Volvo FMX?
Stage 1 chip tuning of the Volvo FMX is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +80 hp with no hardware changes.
What is the Stage 1 potential of the Volvo FMX D11C 410 410hp (301kW) 1950Nm?
Stage 1 for the Volvo FMX D11C 410 410hp (301kW) 1950Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How much does Stage 2 add on the Volvo FMX?
Stage 2 on the Volvo FMX D11C 410 410hp (301kW) 1950Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Volvo FMX warranty after chip tuning?
The factory warranty of the Volvo FMX does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Volvo FMX take?
On the Volvo FMX D11C 410 410hp (301kW) 1950Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Volvo FMX?
Yes, the original ECU firmware of the Volvo FMX D11C 410 410hp (301kW) 1950Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Volvo FMX?
Stage 1 for the Volvo FMX D11C 410 410hp (301kW) 1950Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.