Volvo FM9 D9B 340 340hp (250kW) 1600Nm — Stage 1 file (+50 hp)
hp
Stage 1 file for Volvo FM9 D9B 340 340hp (250kW) 1600Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo FM9 D9B 340 340hp (250kW) 1600Nm ECU
Volvo FM9 (I) D9B 340 340hp (250kW) 1600Nm — premium diesel engine of the commercial segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 340 to 390 hp (+50 hp, +15%) and torque from 1600 to 1840 Nm (+240 Nm).
Volvo shares platforms and engines with Geely and Polestar. Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. High-output Volvo diesels are the premium XC90/XC60 crossovers. DPF/SCR with AdBlue is standard on Euro-6 Volvo diesels. The Volvo D5 (legacy V6) was an iconic premium-segment engine of the 2000s.
Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. High-output Volvo models are premium crossovers with solid headroom for Stage 1.
Frequently asked questions
What is the Stage 1 effect on the Volvo FM9 D9B 340 340hp (250kW) 1600Nm?
Stage 1 for the Volvo FM9 D9B 340 340hp (250kW) 1600Nm adds +50 hp — power increases from 340 to 390 hp (+15%). Torque rises from 1600 to 1840 Nm (+240 Nm).
What does a Stage 1 remap of the Volvo FM9 D9B 340 340hp (250kW) 1600Nm include?
Stage 1 on the Volvo FM9 D9B 340 340hp (250kW) 1600Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +50 hp with no hardware changes.
What does Stage 1 give on the powerful Volvo FM9 D9B 340 340hp (250kW) 1600Nm?
Stage 1 on the powerful Volvo FM9 D9B 340 340hp (250kW) 1600Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Volvo FM9 D9B 340 340hp (250kW) 1600Nm?
Stage 2 for the Volvo FM9 D9B 340 340hp (250kW) 1600Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Volvo FM9?
Stage 1 on the Volvo FM9 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Volvo FM9 D9B 340 340hp (250kW) 1600Nm done?
The full remap cycle for the Volvo FM9 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Volvo FM9?
The original Volvo FM9 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Volvo FM9 D9B 340 340hp (250kW) 1600Nm?
The cost of Stage 1 for the Volvo FM9 D9B 340 340hp (250kW) 1600Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.