Volvo FL7 D6A 240 240hp (176kW) 920Nm — Stage 1 file (+35 hp)
hp
Stage 1 file for Volvo FL7 D6A 240 240hp (176kW) 920Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo FL7 D6A 240 240hp (176kW) 920Nm ECU
Volvo FL7 (I) D6A 240 240hp (176kW) 920Nm — premium diesel engine of the commercial segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 240 to 275 hp (+35 hp, +15%) and torque from 920 to 1060 Nm (+140 Nm).
Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Volvo is historically known for its engineering-led approach to safety and the environment. Volvo uses its own VEA (Volvo Engine Architecture) diesels. The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1. High-output Volvo diesels are the premium XC90/XC60 crossovers.
On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. High-output Volvo models are premium crossovers with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Volvo FL7 D6A 240 240hp (176kW) 920Nm?
The Stage 1 gain for the Volvo FL7 D6A 240 240hp (176kW) 920Nm is 35 hp (+15%) over the stock 240 hp, for a total of 275 hp. Torque rises from 920 to 1060 Nm (+140 Nm).
What is Stage 1 chip tuning for the Volvo FL7?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo FL7 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Volvo FL7?
The high-output Volvo FL7 D6A 240 240hp (176kW) 920Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Volvo FL7 D6A 240 240hp (176kW) 920Nm?
Stage 2 on the Volvo FL7 D6A 240 240hp (176kW) 920Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volvo FL7 remain valid after Stage 1?
After remapping the Volvo FL7, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo FL7?
Reading and writing via OBD takes 25-30 minutes on the Volvo FL7. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo FL7?
Before Stage 1 the original of the Volvo FL7 D6A 240 240hp (176kW) 920Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo FL7 D6A 240 240hp (176kW) 920Nm cost?
The remap price for the Volvo FL7 D6A 240 240hp (176kW) 920Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.