Volvo FL6 D6A 250 250hp (184kW) 825Nm — Stage 1 file (+40 hp)
hp
Stage 1 file for Volvo FL6 D6A 250 250hp (184kW) 825Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo FL6 D6A 250 250hp (184kW) 825Nm ECU
Volvo FL6 (I) D6A 250 250hp (184kW) 825Nm — premium diesel engine of the commercial segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 250 to 290 hp (+40 hp, +16%) and torque from 825 to 950 Nm (+125 Nm).
Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Volvo is historically known for its engineering-led approach to safety and the environment. Volvo uses its own VEA (Volvo Engine Architecture) diesels. The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1. High-output Volvo diesels are the premium XC90/XC60 crossovers.
On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. High-output Volvo models are premium crossovers with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Volvo FL6 D6A 250 250hp (184kW) 825Nm?
After Stage 1 the power of the Volvo FL6 D6A 250 250hp (184kW) 825Nm rises from 250 to 290 hp, a gain of 40 hp (+16%). Torque rises from 825 to 950 Nm (+125 Nm).
How does Stage 1 differ from stock on the Volvo FL6?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo FL6 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Volvo FL6?
The high-output Volvo FL6 D6A 250 250hp (184kW) 825Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Volvo FL6 D6A 250 250hp (184kW) 825Nm?
Stage 2 on the Volvo FL6 D6A 250 250hp (184kW) 825Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volvo FL6 remain valid after Stage 1?
After remapping the Volvo FL6, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo FL6?
Reading and writing via OBD takes 25-30 minutes on the Volvo FL6. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo FL6?
Before Stage 1 the original of the Volvo FL6 D6A 250 250hp (184kW) 825Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo FL6 D6A 250 250hp (184kW) 825Nm cost?
The remap price for the Volvo FL6 D6A 250 250hp (184kW) 825Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.