Volvo FH16 D16E 580 580hp (426kW) 2800Nm — Stage 1 file (+86 hp)
hp
Stage 1 file for Volvo FH16 D16E 580 580hp (426kW) 2800Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo FH16 D16E 580 580hp (426kW) 2800Nm ECU
Volvo FH16 (I) D16E 580 580hp (426kW) 2800Nm — premium petrol engine of the commercial segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 580 to 666 hp (+86 hp, +15%) and torque from 2800 to 3220 Nm (+420 Nm).
Volvo shares platforms and engines with Geely and Polestar. Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Polestar Engineered offers significant potential with hardware. The factory calibration on Volvo petrol engines is conservative. Polestar Engineered is Volvo's performance engine range.
Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Top Volvo Polestar Engineered engines sit at the power ceiling of the Swedish premium segment.
Frequently asked questions
How much does the power of the Volvo FH16 D16E 580 580hp (426kW) 2800Nm increase after Stage 1?
Stage 1 for the Volvo FH16 D16E 580 580hp (426kW) 2800Nm adds +86 hp — power increases from 580 to 666 hp (+15%). Torque rises from 2800 to 3220 Nm (+420 Nm).
What does a Stage 1 remap of the Volvo FH16 D16E 580 580hp (426kW) 2800Nm include?
Stage 1 on the Volvo FH16 D16E 580 580hp (426kW) 2800Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +86 hp with no hardware changes.
What does Stage 1 give on the top-spec Volvo FH16 D16E 580 580hp (426kW) 2800Nm?
On the top-spec Volvo FH16 D16E 580 580hp (426kW) 2800Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Volvo FH16 D16E 580 580hp (426kW) 2800Nm?
Stage 2 for the Volvo FH16 D16E 580 580hp (426kW) 2800Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Volvo FH16?
Stage 1 on the Volvo FH16 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Volvo FH16 D16E 580 580hp (426kW) 2800Nm done?
The full remap cycle for the Volvo FH16 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Volvo FH16?
The original Volvo FH16 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Volvo FH16 D16E 580 580hp (426kW) 2800Nm?
The cost of Stage 1 for the Volvo FH16 D16E 580 580hp (426kW) 2800Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.