Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm — Stage 1 file (+64 hp)
hp
Stage 1 file for Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm ECU
Volvo FH12 (I) D12C/D/E 420 420hp (309kW) 2000Nm — premium diesel engine of the commercial segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 420 to 484 hp (+64 hp, +15%) and torque from 2000 to 2300 Nm (+300 Nm).
Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Volvo is historically known for its engineering-led approach to safety and the environment. The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1. DPF/SCR with AdBlue is standard on Euro-6 Volvo diesels. Volvo uses its own VEA (Volvo Engine Architecture) diesels.
On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. Top Volvo Polestar Engineered engines sit at the power ceiling of the Swedish premium segment.
Frequently asked questions
What is the Stage 1 effect on the Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm?
The Stage 1 gain for the Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm is 64 hp (+15%) over the stock 420 hp, for a total of 484 hp. Torque rises from 2000 to 2300 Nm (+300 Nm).
What is Stage 1 chip tuning for the Volvo FH12?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo FH12 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +64 hp with no hardware changes.
Does Stage 1 make sense on the Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm with this much power?
Stage 1 for the Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm?
Stage 2 on the Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volvo FH12 remain valid after Stage 1?
After remapping the Volvo FH12, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo FH12?
Reading and writing via OBD takes 25-30 minutes on the Volvo FH12. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo FH12?
Before Stage 1 the original of the Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm cost?
The remap price for the Volvo FH12 D12C/D/E 420 420hp (309kW) 2000Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.