Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm — Stage 1 file (+75 hp)
hp
Stage 1 file for Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm ECU
Volvo Penta D6 435 (I) Marine 435hp (320kW) 1050Nm — marine diesel engine of the marine segment of the Volvo Group group (Швеция, 1907). Stage 1 chip tuning raises power from 435 to 510 hp (+75 hp, +17%) and torque from 1050 to 1200 Nm (+150 Nm).
Volvo Penta specialises in marine inboard engines and industrial diesels. Volvo Penta IPS is a signature propulsion system with steerable pods. Volvo Penta is the marine and industrial division of the Volvo Group, founded in 1907. The Volvo Penta D-series is a range of marine diesel engines.
Marine engines are a specialised chip tuning segment focused on torque and fuel consumption. Marine chip tuning is a narrow niche, with calibration tailored to propeller load and operating conditions. The top Mercury Marine units sit at the power ceiling of the marine segment.
Frequently asked questions
How many horsepower does the Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm reach after a remap?
The Stage 1 gain for the Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm is 75 hp (+17%) over the stock 435 hp, for a total of 510 hp. Torque rises from 1050 to 1200 Nm (+150 Nm).
What is Stage 1 chip tuning for the Volvo Penta D6 435?
Stage 1 chip tuning of the Volvo Penta D6 435 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +75 hp with no hardware changes.
What is the Stage 1 potential of the Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm?
Stage 1 for the Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How much does Stage 2 add on the Volvo Penta D6 435?
Stage 2 on the Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Volvo Penta D6 435 warranty after chip tuning?
The factory warranty of the Volvo Penta D6 435 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Volvo Penta D6 435 take?
On the Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Volvo Penta D6 435?
Yes, the original ECU firmware of the Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Volvo Penta D6 435?
Stage 1 for the Volvo Penta D6 435 Marine 435hp (320kW) 1050Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.