Volkswagen Up! 1.0i 60 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Volkswagen Up! 1.0i 60 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Up! 1.0i 60 hp ECU
Volkswagen Up! (2012) 1.0i 60 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 60 to 80 hp (+20 hp, +33%) and torque from 95 to 105 Nm (+10 Nm). A petrol engine built in 2012 — a Tricore platform without strong protection; OBD access works.
TSI / TDI / TGI are VW's badges for petrol / diesel / natural-gas engines respectively. Volkswagen is the parent company of the VAG group (Audi, Skoda, Seat, Cupra, Porsche, Bentley, Lamborghini, Bugatti, Ducati). The VW community is one of the most active in the world for chip tuning. The VW community is one of the most open in Europe, with a large library of ready-made Stage files. R is VW's top performance sub-brand with turbo engines and 4MOTION all-wheel drive. Mid-generation petrol models use standard OBD flash via MQB.
ECUs are standardised across VAG, so a single file often fits a dozen different models. APR, Revo and Stage 1+ are the leading tuning brands for VW. Stage 1 on VW is typically a quick, standard turnaround. In VW's city-car segment, Stage 1 is more about drivability than outright power. Low-output VW engines sit in the compact segment, and Stage 1 is safe on them. On naturally aspirated VW engines the main effect is sharper throttle response.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Up! 1.0i 60 hp?
Stage 1 for the Volkswagen Up! 1.0i 60 hp adds +20 hp — power increases from 60 to 80 hp (+33%). Torque rises from 95 to 105 Nm (+10 Nm).
What does a Stage 1 remap of the Volkswagen Up! 1.0i 60 hp include?
Stage 1 on the Volkswagen Up! 1.0i 60 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is Stage 1 safe for the low-output Volkswagen Up! 1.0i 60 hp?
Yes, Stage 1 on the low-output Volkswagen Up! 1.0i 60 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Volkswagen Up! 1.0i 60 hp?
Stage 2 for the Volkswagen Up! 1.0i 60 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Volkswagen Up!?
Stage 1 on the Volkswagen Up! voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Volkswagen Up! 1.0i 60 hp done?
The full remap cycle for the Volkswagen Up! — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Volkswagen Up!?
The original Volkswagen Up! ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Volkswagen Up! 1.0i 60 hp?
The cost of Stage 1 for the Volkswagen Up! 1.0i 60 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.