Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp — Stage 1 file (+46 hp)
hp
Stage 1 file for Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp ECU
Volkswagen Transporter / Multivan (2015 - T6) 2.0 TFSI - TSI 204 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 204 to 250 hp (+46 hp, +23%) and torque from 350 to 400 Nm (+50 Nm). A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.
GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. 'Volkswagen' literally means 'the people's car' — the original philosophy of mass affordability. VW shares its ECUs and calibration algorithms with Audi. The MQB and MLB platforms allow petrol ECUs to be standardised with Audi, Skoda and Seat. GTI is Volkswagen's performance range dating from 1976.
On pre-2017 VWs, Stage 1 is flashed via OBD without a bench. The VW community is renowned for its active tuning scene and a huge library of available Stage files. ECUs are standardised across VAG, so a single file often fits a dozen different models. High-output VW engines (GTI/R) offer solid headroom for Stage 1. On the GTI and R, Stage 1 works on stock with no complications. VW's premium segment is a high-output platform with Stage 2 potential.
Frequently asked questions
How much does the power of the Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp increase after Stage 1?
Stage 1 for the Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp adds +46 hp — power increases from 204 to 250 hp (+23%). Torque rises from 350 to 400 Nm (+50 Nm).
What does a Stage 1 remap of the Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Transporter / Multivan with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +46 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Volkswagen Transporter / Multivan?
Stage 1 on the powerful Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp?
Stage 2 for the Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Volkswagen Transporter / Multivan remain valid after Stage 1?
After remapping the Volkswagen Transporter / Multivan, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Transporter / Multivan?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Transporter / Multivan. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Transporter / Multivan?
Before Stage 1 the original of the Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp cost?
The remap price for the Volkswagen Transporter / Multivan 2.0 TFSI - TSI 204 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.