Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp — Stage 1 file (+56 hp)
hp
Stage 1 file for Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp ECU
Volkswagen Transporter / Multivan (2009 - T5) 2.0 TDI CR 114 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 114 to 170 hp (+56 hp, +49%) and torque from 250 to 400 Nm (+150 Nm). Diesel engines built in 2009 — the era of classic Common Rail without strong encryption.
GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. 'Volkswagen' literally means 'the people's car' — the original philosophy of mass affordability. TDI is Volkswagen's badge for direct-injection turbo-diesel engines. The MQB platform lets a single calibration cover VW/Audi/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 VW diesels.
Stage 1 on mid-range VW diesels delivers a noticeable torque gain. The MQB platform is the most refined chip tuning segment in Europe. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
Frequently asked questions
How much does the power of the Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp increase after Stage 1?
Stage 1 chip tuning on the Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp boosts engine output by 56 hp: from 114 to 170 hp. Torque rises from 250 to 400 Nm (+150 Nm).
What changes in the Volkswagen Transporter / Multivan ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Transporter / Multivan with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +56 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp?
A remap of the Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp?
Stage 2 for the Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Volkswagen Transporter / Multivan remain valid after Stage 1?
After remapping the Volkswagen Transporter / Multivan, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Transporter / Multivan?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Transporter / Multivan. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Transporter / Multivan?
Before Stage 1 the original of the Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp cost?
The remap price for the Volkswagen Transporter / Multivan 2.0 TDI CR 114 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.