Volkswagen Touran 1.5 TSI 150 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Volkswagen Touran 1.5 TSI 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Touran 1.5 TSI 150 hp ECU
Volkswagen Touran (2016) 1.5 TSI 150 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 150 to 175 hp (+25 hp, +17%) and torque from 250 to 300 Nm (+50 Nm). ECU — Bosch MG1CS011. Flashing method: OBD or Bench depending on the unit's protection. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 4 configurations · 4 ECU variants. The 2016 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. TSI is Volkswagen's badge for direct-injection turbo-petrol engines. VW shares its ECUs and calibration algorithms with Audi. The MQB and MLB platforms allow petrol ECUs to be standardised with Audi, Skoda and Seat.
The VW community is renowned for its active tuning scene and a huge library of available Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models.
DSG (Direct Shift Gearbox) is VW's proprietary dual-clutch automated gearbox. The DSG TCU needs calibration for Stage 1+ — the factory torque limiter usually sits below the engine's real capability. The wet DSG is the standard gearbox for R-models and handles significant torque.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Touran 1.5 TSI 150 hp?
The Stage 1 gain for the Volkswagen Touran 1.5 TSI 150 hp is 25 hp (+17%) over the stock 150 hp, for a total of 175 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What is Stage 1 chip tuning for the Volkswagen Touran?
Stage 1 on the Volkswagen Touran 1.5 TSI 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 TSI 150 hp?
Stage 1 on the Volkswagen Touran 1.5 TSI 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Volkswagen Touran 1.5 TSI 150 hp?
Stage 2 on the Volkswagen Touran 1.5 TSI 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Volkswagen Touran 1.5 TSI 150 hp run?
The control unit of the Volkswagen Touran 1.5 TSI 150 hp is the Bosch MG1CS011. Before flashing, the engineer identifies the exact revision and selects the write method.
Which TCUs are found on the Volkswagen Touran 1.5 TSI 150 hp?
The Volkswagen Touran 1.5 TSI 150 hp was fitted with different automatic-transmission units: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x. All are supported via Bench reading; the Stage 1 calibration is done for the specific TCU after the revision is identified.
Does Stage 1 void the warranty on the Volkswagen Touran?
Stage 1 on the Volkswagen Touran voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Volkswagen Touran 1.5 TSI 150 hp done?
The full remap cycle for the Volkswagen Touran — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Volkswagen Touran?
The original Volkswagen Touran ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Volkswagen Touran 1.5 TSI 150 hp?
The cost of Stage 1 for the Volkswagen Touran 1.5 TSI 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.