Volkswagen Touran 1.6 TDI CR 90 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Volkswagen Touran 1.6 TDI CR 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Touran 1.6 TDI CR 90 hp ECU
Volkswagen Touran (2010) 1.6 TDI CR 90 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 90 to 140 hp (+50 hp, +56%) and torque from 230 to 300 Nm (+70 Nm). ECU — Siemens/Continental PCR2.1. Flashing method: OBD or Bench depending on the unit's protection. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The ID line is VW's dedicated series of all-electric models. VAG is Europe's largest automotive group by production volume. Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. The factory calibration on VW diesels is conservative, leaving headroom for Stage 1. DPF/SCR with AdBlue is standard on all Euro-6 VW diesels. TDI is Volkswagen's badge for direct-injection turbo-diesel engines.
On GTI and R models, Stage 1 works fine on stock hardware. Low-output VW engines sit in the compact segment, and Stage 1 is safe on them. On naturally aspirated VW engines the main effect is sharper throttle response. In VW's city-car segment, Stage 1 is more about drivability than outright power.
Frequently asked questions
What power gain do you get after chip tuning the Volkswagen Touran 1.6 TDI CR 90 hp?
After Stage 1 the power of the Volkswagen Touran 1.6 TDI CR 90 hp rises from 90 to 140 hp, a gain of 50 hp (+56%). Torque rises from 230 to 300 Nm (+70 Nm).
How does Stage 1 differ from stock on the Volkswagen Touran?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Touran with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
Is Stage 1 worth doing on the base Volkswagen Touran?
Stage 1 on the base Volkswagen Touran is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Volkswagen Touran 1.6 TDI CR 90 hp?
Stage 2 on the Volkswagen Touran 1.6 TDI CR 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Volkswagen Touran 1.6 TDI CR 90 hp use?
The Volkswagen Touran 1.6 TDI CR 90 hp is fitted with the Siemens/Continental PCR2.1 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Volkswagen Touran remain valid after Stage 1?
After remapping the Volkswagen Touran, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Touran?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Touran. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Touran?
Before Stage 1 the original of the Volkswagen Touran 1.6 TDI CR 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Touran 1.6 TDI CR 90 hp cost?
The remap price for the Volkswagen Touran 1.6 TDI CR 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.