Volkswagen Touareg 3.6 FSI 280 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Volkswagen Touareg 3.6 FSI 280 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Touareg 3.6 FSI 280 hp ECU
Volkswagen Touareg (2002) 3.6 FSI 280 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 280 to 300 hp (+20 hp, +7%) and torque from 350 to 380 Nm (+30 Nm). This engine ships with different ECU variants: Bosch MED17.1.6, Bosch MED9.1, Bosch MED9.1.x. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 6 configurations · 3 ECU variants. The 2002 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. TSI is Volkswagen's badge for direct-injection turbo-petrol engines. VW shares its ECUs and calibration algorithms with Audi. The MQB and MLB platforms allow petrol ECUs to be standardised with Audi, Skoda and Seat.
The VW community is renowned for its active tuning scene and a huge library of available Stage files. APR, Revo and Stage 1+ are the leading tuning brands for VW. On GTI and R models, Stage 1 works fine on stock hardware. High-output VW engines (GTI/R) offer solid headroom for Stage 1. On the GTI and R, Stage 1 works on stock with no complications. VW's premium segment is a high-output platform with Stage 2 potential.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Touareg 3.6 FSI 280 hp?
After Stage 1 the power of the Volkswagen Touareg 3.6 FSI 280 hp rises from 280 to 300 hp, a gain of 20 hp (+7%). Torque rises from 350 to 380 Nm (+30 Nm).
How does Stage 1 differ from stock on the Volkswagen Touareg?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Touareg with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Volkswagen Touareg?
The high-output Volkswagen Touareg 3.6 FSI 280 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Volkswagen Touareg 3.6 FSI 280 hp?
Stage 2 on the Volkswagen Touareg 3.6 FSI 280 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Volkswagen Touareg 3.6 FSI 280 hp built with?
The Volkswagen Touareg 3.6 FSI 280 hp comes with 3 ECU variants: Bosch MED17.1.6, Bosch MED9.1, Bosch MED9.1.x. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Volkswagen Touareg remain valid after Stage 1?
After remapping the Volkswagen Touareg, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Touareg?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Touareg. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Touareg?
Before Stage 1 the original of the Volkswagen Touareg 3.6 FSI 280 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Touareg 3.6 FSI 280 hp cost?
The remap price for the Volkswagen Touareg 3.6 FSI 280 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.