Volkswagen Sharan 2.0 TSI 220 hp — Stage 1 file (+80 hp)
hp
Stage 1 file for Volkswagen Sharan 2.0 TSI 220 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Sharan 2.0 TSI 220 hp ECU
Volkswagen Sharan (2015) 2.0 TSI 220 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 220 to 300 hp (+80 hp, +36%) and torque from 350 to 420 Nm (+70 Nm). This engine ships with different ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.2, Siemens/Continental Simos18.3, Siemens/Continental Simos18.6. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB) — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 7 configurations · 7 ECU variants. The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. TSI is Volkswagen's badge for direct-injection turbo-petrol engines. VW shares its ECUs and calibration algorithms with Audi. The MQB and MLB platforms allow petrol ECUs to be standardised with Audi, Skoda and Seat.
APR, Revo and Stage 1+ are the leading tuning brands for VW. Stage 1 on VW is typically a quick, standard turnaround. On GTI and R models, Stage 1 works fine on stock hardware. High-output VW engines (GTI/R) offer solid headroom for Stage 1. On the GTI and R, Stage 1 works on stock with no complications. VW's premium segment is a high-output platform with Stage 2 potential.
DSG (Direct Shift Gearbox) is VW's proprietary dual-clutch automated gearbox. The DSG TCU needs calibration for Stage 1+ — the factory torque limiter usually sits below the engine's real capability. The wet DSG is the standard gearbox for R-models and handles significant torque.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Sharan 2.0 TSI 220 hp?
The Stage 1 gain for the Volkswagen Sharan 2.0 TSI 220 hp is 80 hp (+36%) over the stock 220 hp, for a total of 300 hp. Torque rises from 350 to 420 Nm (+70 Nm).
What is Stage 1 chip tuning for the Volkswagen Sharan?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Sharan with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +80 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Volkswagen Sharan?
The high-output Volkswagen Sharan 2.0 TSI 220 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Volkswagen Sharan 2.0 TSI 220 hp?
Stage 2 on the Volkswagen Sharan 2.0 TSI 220 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Volkswagen Sharan 2.0 TSI 220 hp built with?
The Volkswagen Sharan 2.0 TSI 220 hp comes with 4 ECU variants: Siemens/Continental Simos18.1, Siemens/Continental Simos18.2, Siemens/Continental Simos18.3, Siemens/Continental Simos18.6. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB)) on the Volkswagen Sharan be calibrated?
The Volkswagen Sharan 2.0 TSI 220 hp has 3 TCU variants: Temic DQ250 (MQB), Bosch DQ38x, Bosch DQ500 (MQB). Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Volkswagen Sharan remain valid after Stage 1?
After remapping the Volkswagen Sharan, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Sharan?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Sharan. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Sharan?
Before Stage 1 the original of the Volkswagen Sharan 2.0 TSI 220 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Sharan 2.0 TSI 220 hp cost?
The remap price for the Volkswagen Sharan 2.0 TSI 220 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.