Volkswagen Sharan 2.0 TDI CR 163 hp — Stage 1 file (+42 hp)
hp
Stage 1 file for Volkswagen Sharan 2.0 TDI CR 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Sharan 2.0 TDI CR 163 hp ECU
Volkswagen Sharan (2010) 2.0 TDI CR 163 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 163 to 205 hp (+42 hp, +26%) and torque from 350 to 420 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC17C46, Bosch EDC17C64, Bosch EDC17CP14, Bosch EDC17CP20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250 (MQB), Temic DQ250E, Temic DQ250F — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 7 configurations · 7 ECU variants. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. The factory calibration on VW diesels is conservative, leaving headroom for Stage 1. VW's diesel range is fully standardised with Audi, Skoda and Seat within VAG. VW's commercial segment features the most widely tuned diesels in Europe.
The VW community is renowned for its active tuning scene and a huge library of available Stage files. Stage 1 on VW commercial diesels focuses on torque for loaded driving. Stage 1 on mid-range VW diesels delivers a noticeable torque gain. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
DSG (Direct Shift Gearbox) is VW's proprietary dual-clutch automated gearbox. The DSG TCU needs calibration for Stage 1+ — the factory torque limiter usually sits below the engine's real capability. The wet DSG is the standard gearbox for R-models and handles significant torque.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Sharan 2.0 TDI CR 163 hp?
After Stage 1 the power of the Volkswagen Sharan 2.0 TDI CR 163 hp rises from 163 to 205 hp, a gain of 42 hp (+26%). Torque rises from 350 to 420 Nm (+70 Nm).
How does Stage 1 differ from stock on the Volkswagen Sharan?
Stage 1 chip tuning of the Volkswagen Sharan is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +42 hp with no hardware changes.
Can you do Stage 1 on the Volkswagen Sharan 2.0 TDI CR 163 hp?
Yes, Stage 1 for the Volkswagen Sharan 2.0 TDI CR 163 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Volkswagen Sharan?
Stage 2 on the Volkswagen Sharan 2.0 TDI CR 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Volkswagen Sharan 2.0 TDI CR 163 hp?
The Volkswagen Sharan 2.0 TDI CR 163 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C46, Bosch EDC17C64, Bosch EDC17CP14, Bosch EDC17CP20. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Volkswagen Sharan 2.0 TDI CR 163 hp have?
The Volkswagen Sharan 2.0 TDI CR 163 hp comes with 3 different automatic-transmission TCU units: Temic DQ250 (MQB), Temic DQ250E, Temic DQ250F. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Volkswagen Sharan warranty after chip tuning?
The factory warranty of the Volkswagen Sharan does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Volkswagen Sharan take?
On the Volkswagen Sharan 2.0 TDI CR 163 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Volkswagen Sharan?
Yes, the original ECU firmware of the Volkswagen Sharan 2.0 TDI CR 163 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Volkswagen Sharan?
Stage 1 for the Volkswagen Sharan 2.0 TDI CR 163 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.