Volkswagen Polo 1.5 TSI 150 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Volkswagen Polo 1.5 TSI 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Polo 1.5 TSI 150 hp ECU
Volkswagen Polo (2017 - A0 Ph1) 1.5 TSI 150 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 150 to 175 hp (+25 hp, +17%) and torque from 250 to 300 Nm (+50 Nm). ECU — Bosch MG1CS011. Flashing method: OBD or Bench depending on the unit's protection. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 4 configurations · 4 ECU variants. A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. 'Volkswagen' literally means 'the people's car' — the original philosophy of mass affordability. VW shares its ECUs and calibration algorithms with Audi. The MQB and MLB platforms allow petrol ECUs to be standardised with Audi, Skoda and Seat. GTI is Volkswagen's performance range dating from 1976.
The VW community is renowned for its active tuning scene and a huge library of available Stage files. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved.
The DSG TCU needs calibration for Stage 1+ — the factory torque limiter usually sits below the engine's real capability. The wet DSG is the standard gearbox for R-models and handles significant torque. DSG comes in dry- and wet-clutch versions with different torque classes.
Frequently asked questions
How much does the power of the Volkswagen Polo 1.5 TSI 150 hp increase after Stage 1?
Stage 1 for the Volkswagen Polo 1.5 TSI 150 hp adds +25 hp — power increases from 150 to 175 hp (+17%). Torque rises from 250 to 300 Nm (+50 Nm).
What does a Stage 1 remap of the Volkswagen Polo 1.5 TSI 150 hp include?
Stage 1 chip tuning of the Volkswagen Polo is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
Can you do Stage 1 on the Volkswagen Polo 1.5 TSI 150 hp?
Yes, Stage 1 for the Volkswagen Polo 1.5 TSI 150 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Volkswagen Polo?
Stage 2 for the Volkswagen Polo 1.5 TSI 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECU is fitted to the Volkswagen Polo 1.5 TSI 150 hp?
The Volkswagen Polo 1.5 TSI 150 hp ECU is the Bosch MG1CS011. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
How many TCU units does the Volkswagen Polo 1.5 TSI 150 hp have?
The Volkswagen Polo 1.5 TSI 150 hp comes with 3 different automatic-transmission TCU units: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Volkswagen Polo warranty after chip tuning?
The factory warranty of the Volkswagen Polo does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Volkswagen Polo take?
On the Volkswagen Polo 1.5 TSI 150 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Volkswagen Polo?
Yes, the original ECU firmware of the Volkswagen Polo 1.5 TSI 150 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Volkswagen Polo?
Stage 1 for the Volkswagen Polo 1.5 TSI 150 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.