Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp ECU
Volkswagen Polo (2014 - 6C1) 1.4 TSI/TFSI S&S 150 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 150 to 180 hp (+30 hp, +20%) and torque from 250 to 300 Nm (+50 Nm). This engine ships with different ECU variants: Bosch MED17.1.21, Bosch MED17.1.61, Bosch MED17.5.21, Bosch MED17.5.25. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2 — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 6 ECU variants. A petrol engine built in 2014 — a Tricore platform without strong protection; OBD access works.
'Volkswagen' literally means 'the people's car' — the original philosophy of mass affordability. DSG is the VAG group's proprietary automated gearbox, developed by Volkswagen. TSI / TDI / TGI are VW's badges for petrol / diesel / natural-gas engines respectively. GTI is Volkswagen's performance range dating from 1976. Mid-range VW turbo-petrol engines are a high-volume Stage 1 subject. The VW community is one of the most open in Europe, with a large library of ready-made Stage files.
APR, Revo and Stage 1+ are the leading tuning brands for VW. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved.
DSG comes in dry- and wet-clutch versions with different torque classes. Tiptronic is VW's classic torque-converter automatic for longitudinal engines. DSG (Direct Shift Gearbox) is VW's proprietary dual-clutch automated gearbox.
Frequently asked questions
What power gain do you get after chip tuning the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp?
Stage 1 for the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp adds +30 hp — power increases from 150 to 180 hp (+20%). Torque rises from 250 to 300 Nm (+50 Nm).
What does a Stage 1 remap of the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Polo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp?
A remap of the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp?
Stage 2 for the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp built with?
The Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp comes with 4 ECU variants: Bosch MED17.1.21, Bosch MED17.1.61, Bosch MED17.5.21, Bosch MED17.5.25. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DQ200 (MQB), Temic DQ200G2) on the Volkswagen Polo be calibrated?
The Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp has 2 TCU variants: Temic DQ200 (MQB), Temic DQ200G2. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Volkswagen Polo remain valid after Stage 1?
After remapping the Volkswagen Polo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Polo?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Polo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Polo?
Before Stage 1 the original of the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp cost?
The remap price for the Volkswagen Polo 1.4 TSI/TFSI S&S 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.