Volkswagen Polo 1.4 TSI 131 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Volkswagen Polo 1.4 TSI 131 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Polo 1.4 TSI 131 hp ECU
Volkswagen Polo (2014 - 6C1) 1.4 TSI 131 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 131 to 146 hp (+15 hp, +11%) and torque from 225 to 265 Nm (+40 Nm). The 2014 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. TSI is Volkswagen's badge for direct-injection turbo-petrol engines. VW shares its ECUs and calibration algorithms with Audi. The MQB and MLB platforms allow petrol ECUs to be standardised with Audi, Skoda and Seat.
On GTI and R models, Stage 1 works fine on stock hardware. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Polo 1.4 TSI 131 hp?
After Stage 1 the power of the Volkswagen Polo 1.4 TSI 131 hp rises from 131 to 146 hp, a gain of 15 hp (+11%). Torque rises from 225 to 265 Nm (+40 Nm).
How does Stage 1 differ from stock on the Volkswagen Polo?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Polo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +15 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Polo 1.4 TSI 131 hp?
A remap of the Volkswagen Polo 1.4 TSI 131 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Polo 1.4 TSI 131 hp?
Stage 2 on the Volkswagen Polo 1.4 TSI 131 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volkswagen Polo remain valid after Stage 1?
After remapping the Volkswagen Polo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Polo?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Polo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Polo?
Before Stage 1 the original of the Volkswagen Polo 1.4 TSI 131 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Polo 1.4 TSI 131 hp cost?
The remap price for the Volkswagen Polo 1.4 TSI 131 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.