Volkswagen Polo 1.0i 60 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Volkswagen Polo 1.0i 60 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Polo 1.0i 60 hp ECU
Volkswagen Polo (2014 - 6C1) 1.0i 60 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 60 to 80 hp (+20 hp, +33%) and torque from 95 to 105 Nm (+10 Nm). In the CHIPOK database: 2 configurations. The 2014 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The ID line is VW's dedicated series of all-electric models. VAG is Europe's largest automotive group by production volume. Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. The factory calibration on VW petrol engines is conservative, leaving headroom for Stage 1. TGI is VW's designation for natural-gas (CNG) engines. TSI is Volkswagen's badge for direct-injection turbo-petrol engines.
APR, Revo and Stage 1+ are the leading tuning brands for VW. Stage 1 on VW is typically a quick, standard turnaround. On GTI and R models, Stage 1 works fine on stock hardware. Low-output VW engines sit in the compact segment, and Stage 1 is safe on them. On naturally aspirated VW engines the main effect is sharper throttle response. In VW's city-car segment, Stage 1 is more about drivability than outright power.
Frequently asked questions
What power gain do you get after chip tuning the Volkswagen Polo 1.0i 60 hp?
The Stage 1 gain for the Volkswagen Polo 1.0i 60 hp is 20 hp (+33%) over the stock 60 hp, for a total of 80 hp. Torque rises from 95 to 105 Nm (+10 Nm).
What is Stage 1 chip tuning for the Volkswagen Polo?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Polo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
Is Stage 1 worth doing on the base Volkswagen Polo?
Stage 1 on the base Volkswagen Polo is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Volkswagen Polo 1.0i 60 hp?
Stage 2 on the Volkswagen Polo 1.0i 60 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volkswagen Polo remain valid after Stage 1?
After remapping the Volkswagen Polo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Polo?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Polo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Polo?
Before Stage 1 the original of the Volkswagen Polo 1.0i 60 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Polo 1.0i 60 hp cost?
The remap price for the Volkswagen Polo 1.0i 60 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.