Volkswagen Polo 1.5 TDI 90 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Volkswagen Polo 1.5 TDI 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Polo 1.5 TDI 90 hp ECU
Volkswagen Polo (2009 - 6R) 1.5 TDI 90 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 90 to 130 hp (+40 hp, +44%) and torque from 230 to 300 Nm (+70 Nm). In the CHIPOK database: 2 configurations. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The ID line is VW's dedicated series of all-electric models. VAG is Europe's largest automotive group by production volume. Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. The factory calibration on VW diesels is conservative, leaving headroom for Stage 1. DPF/SCR with AdBlue is standard on all Euro-6 VW diesels. TDI is Volkswagen's badge for direct-injection turbo-diesel engines.
APR, Revo and Stage 1+ are the leading tuning brands for VW. Stage 1 on VW is typically a quick, standard turnaround. On GTI and R models, Stage 1 works fine on stock hardware. Low-output VW engines sit in the compact segment, and Stage 1 is safe on them. On naturally aspirated VW engines the main effect is sharper throttle response. In VW's city-car segment, Stage 1 is more about drivability than outright power.
Frequently asked questions
What power gain do you get after chip tuning the Volkswagen Polo 1.5 TDI 90 hp?
After Stage 1 the power of the Volkswagen Polo 1.5 TDI 90 hp rises from 90 to 130 hp, a gain of 40 hp (+44%). Torque rises from 230 to 300 Nm (+70 Nm).
How does Stage 1 differ from stock on the Volkswagen Polo?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Polo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
Is Stage 1 worth doing on the base Volkswagen Polo?
Stage 1 on the base Volkswagen Polo is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Volkswagen Polo 1.5 TDI 90 hp?
Stage 2 on the Volkswagen Polo 1.5 TDI 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volkswagen Polo remain valid after Stage 1?
After remapping the Volkswagen Polo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Polo?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Polo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Polo?
Before Stage 1 the original of the Volkswagen Polo 1.5 TDI 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Polo 1.5 TDI 90 hp cost?
The remap price for the Volkswagen Polo 1.5 TDI 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.