Volkswagen Polo 1.9 TDI IP 130 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Volkswagen Polo 1.9 TDI IP 130 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Polo 1.9 TDI IP 130 hp ECU
Volkswagen Polo (2005 - 9N3) 1.9 TDI IP 130 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 130 to 160 hp (+30 hp, +23%) and torque from 310 to 365 Nm (+55 Nm). ECU — Bosch EDC15P+. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. Diesel engines built in 2005 — the era of classic Common Rail without strong encryption.
VAG is Europe's largest automotive group by production volume. Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. TDI is Volkswagen's badge for direct-injection turbo-diesel engines. The MQB platform lets a single calibration cover VW/Audi/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 VW diesels.
On GTI and R models, Stage 1 works fine on stock hardware. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved.
Frequently asked questions
How many horsepower does the Volkswagen Polo 1.9 TDI IP 130 hp reach after a remap?
Stage 1 for the Volkswagen Polo 1.9 TDI IP 130 hp adds +30 hp — power increases from 130 to 160 hp (+23%). Torque rises from 310 to 365 Nm (+55 Nm).
What does a Stage 1 remap of the Volkswagen Polo 1.9 TDI IP 130 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Polo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Polo 1.9 TDI IP 130 hp?
A remap of the Volkswagen Polo 1.9 TDI IP 130 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Polo 1.9 TDI IP 130 hp?
Stage 2 for the Volkswagen Polo 1.9 TDI IP 130 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Volkswagen Polo 1.9 TDI IP 130 hp use?
The Volkswagen Polo 1.9 TDI IP 130 hp is fitted with the Bosch EDC15P+ ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Volkswagen Polo remain valid after Stage 1?
After remapping the Volkswagen Polo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Polo?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Polo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Polo?
Before Stage 1 the original of the Volkswagen Polo 1.9 TDI IP 130 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Polo 1.9 TDI IP 130 hp cost?
The remap price for the Volkswagen Polo 1.9 TDI IP 130 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.