Volkswagen Polo 1.2 HTP 64 hp — Stage 1 file (+6 hp)
hp
Stage 1 file for Volkswagen Polo 1.2 HTP 64 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Polo 1.2 HTP 64 hp ECU
Volkswagen Polo (2005 - 9N3) 1.2 HTP 64 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 64 to 70 hp (+6 hp, +9%) and torque from 112 to 122 Nm (+10 Nm). In the CHIPOK database: 2 configurations. The 2005 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
DSG is the VAG group's proprietary automated gearbox, developed by Volkswagen. TSI / TDI / TGI are VW's badges for petrol / diesel / natural-gas engines respectively. Volkswagen is the parent company of the VAG group (Audi, Skoda, Seat, Cupra, Porsche, Bentley, Lamborghini, Bugatti, Ducati). Low-output VW petrol engines are naturally aspirated, so the gain is modest but safe. The VW community is one of the most open in Europe, with a large library of ready-made Stage files. R is VW's top performance sub-brand with turbo engines and 4MOTION all-wheel drive.
Stage 1 on VW is typically a quick, standard turnaround. The VW community is renowned for its active tuning scene and a huge library of available Stage files. APR, Revo and Stage 1+ are the leading tuning brands for VW. Low-output VW engines sit in the compact segment, and Stage 1 is safe on them. On naturally aspirated VW engines the main effect is sharper throttle response. In VW's city-car segment, Stage 1 is more about drivability than outright power.
Frequently asked questions
How many horsepower does the Volkswagen Polo 1.2 HTP 64 hp reach after a remap?
After Stage 1 the power of the Volkswagen Polo 1.2 HTP 64 hp rises from 64 to 70 hp, a gain of 6 hp (+9%). Torque rises from 112 to 122 Nm (+10 Nm).
How does Stage 1 differ from stock on the Volkswagen Polo?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Polo with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +6 hp with no hardware changes.
Is Stage 1 worth doing on the base Volkswagen Polo?
Stage 1 on the base Volkswagen Polo is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Volkswagen Polo 1.2 HTP 64 hp?
Stage 2 on the Volkswagen Polo 1.2 HTP 64 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volkswagen Polo remain valid after Stage 1?
After remapping the Volkswagen Polo, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Polo?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Polo. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Polo?
Before Stage 1 the original of the Volkswagen Polo 1.2 HTP 64 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Polo 1.2 HTP 64 hp cost?
The remap price for the Volkswagen Polo 1.2 HTP 64 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.