Volkswagen Passat 3.6 FSI 300 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Volkswagen Passat 3.6 FSI 300 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Passat 3.6 FSI 300 hp ECU
Volkswagen Passat (2010 - B7) 3.6 FSI 300 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 300 to 320 hp (+20 hp, +7%) and torque from 350 to 379 Nm (+29 Nm). In the CHIPOK database: 2 configurations. A petrol engine built in 2010 — a Tricore platform without strong protection; OBD access works.
VAG is Europe's largest automotive group by production volume. Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. TGI is VW's designation for natural-gas (CNG) engines. TSI is Volkswagen's badge for direct-injection turbo-petrol engines. VW shares its ECUs and calibration algorithms with Audi.
ECUs are standardised across VAG, so a single file often fits a dozen different models. APR, Revo and Stage 1+ are the leading tuning brands for VW. Stage 1 on VW is typically a quick, standard turnaround. VW's premium segment is a high-output platform with Stage 2 potential. High-output VW engines (GTI/R) offer solid headroom for Stage 1. On the GTI and R, Stage 1 works on stock with no complications.
Frequently asked questions
How many horsepower does the Volkswagen Passat 3.6 FSI 300 hp reach after a remap?
Stage 1 for the Volkswagen Passat 3.6 FSI 300 hp adds +20 hp — power increases from 300 to 320 hp (+7%). Torque rises from 350 to 379 Nm (+29 Nm).
What does a Stage 1 remap of the Volkswagen Passat 3.6 FSI 300 hp include?
Stage 1 on the Volkswagen Passat 3.6 FSI 300 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
What does Stage 1 give on the powerful Volkswagen Passat 3.6 FSI 300 hp?
Stage 1 on the powerful Volkswagen Passat 3.6 FSI 300 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Volkswagen Passat 3.6 FSI 300 hp?
Stage 2 for the Volkswagen Passat 3.6 FSI 300 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Volkswagen Passat?
Stage 1 on the Volkswagen Passat voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Volkswagen Passat 3.6 FSI 300 hp done?
The full remap cycle for the Volkswagen Passat — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Volkswagen Passat?
The original Volkswagen Passat ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Volkswagen Passat 3.6 FSI 300 hp?
The cost of Stage 1 for the Volkswagen Passat 3.6 FSI 300 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.