Volkswagen Passat 2.0 TDI IP 136 hp — Stage 1 file (+39 hp)
hp
Stage 1 file for Volkswagen Passat 2.0 TDI IP 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Passat 2.0 TDI IP 136 hp ECU
Volkswagen Passat (1996 - B5) 2.0 TDI IP 136 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 136 to 175 hp (+39 hp, +29%) and torque from 320 to 410 Nm (+90 Nm). ECU — Bosch EDC16U34. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. The 1996 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. DPF/SCR with AdBlue is standard on all Euro-6 VW diesels. On older VW diesels, Stage 1 is flashed via OBD with no complications. The factory calibration on VW diesels is conservative, leaving headroom for Stage 1.
Stage 1 on mid-range VW diesels delivers a noticeable torque gain. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Passat 2.0 TDI IP 136 hp?
After Stage 1 the power of the Volkswagen Passat 2.0 TDI IP 136 hp rises from 136 to 175 hp, a gain of 39 hp (+29%). Torque rises from 320 to 410 Nm (+90 Nm).
How does Stage 1 differ from stock on the Volkswagen Passat?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Passat with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +39 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Passat 2.0 TDI IP 136 hp?
A remap of the Volkswagen Passat 2.0 TDI IP 136 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Passat 2.0 TDI IP 136 hp?
Stage 2 on the Volkswagen Passat 2.0 TDI IP 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Volkswagen Passat 2.0 TDI IP 136 hp use?
The Volkswagen Passat 2.0 TDI IP 136 hp is fitted with the Bosch EDC16U34 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Volkswagen Passat remain valid after Stage 1?
After remapping the Volkswagen Passat, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Passat?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Passat. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Passat?
Before Stage 1 the original of the Volkswagen Passat 2.0 TDI IP 136 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Passat 2.0 TDI IP 136 hp cost?
The remap price for the Volkswagen Passat 2.0 TDI IP 136 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.