Volkswagen ID.3 Pro S 204 hp — Stage 1 file (+16 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Volkswagen ID.3 Pro S 204 hp ECU

Volkswagen ID.3 (2021) Pro S 204 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 204 to 220 hp (+16 hp, +8%) and torque from 310 to 340 Nm (+30 Nm). A modern petrol engine built in 2021 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.

Volkswagen is the parent company of the VAG group (Audi, Skoda, Seat, Cupra, Porsche, Bentley, Lamborghini, Bugatti, Ducati). The VW community is one of the most active in the world for chip tuning. The ID line is VW's dedicated series of all-electric models. The MQB and MLB platforms allow petrol ECUs to be standardised with Audi, Skoda and Seat. R is VW's top performance sub-brand with turbo engines and 4MOTION all-wheel drive. TSI is Volkswagen's badge for direct-injection turbo-petrol engines.

APR, Revo and Stage 1+ are the leading tuning brands for VW. Stage 1 on VW is typically a quick, standard turnaround. On GTI and R models, Stage 1 works fine on stock hardware. High-output VW engines (GTI/R) offer solid headroom for Stage 1. On the GTI and R, Stage 1 works on stock with no complications. VW's premium segment is a high-output platform with Stage 2 potential.

Frequently asked questions

How much does the power of the Volkswagen ID.3 Pro S 204 hp increase after Stage 1?

The Stage 1 gain for the Volkswagen ID.3 Pro S 204 hp is 16 hp (+8%) over the stock 204 hp, for a total of 220 hp. Torque rises from 310 to 340 Nm (+30 Nm).

What is Stage 1 chip tuning for the Volkswagen ID.3?

Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen ID.3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +16 hp with no hardware changes.

Do you need hardware changes for Stage 1 on the Volkswagen ID.3?

The high-output Volkswagen ID.3 Pro S 204 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.

What is Stage 2 for the Volkswagen ID.3 Pro S 204 hp?

Stage 2 on the Volkswagen ID.3 Pro S 204 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Does the factory warranty of the Volkswagen ID.3 remain valid after Stage 1?

After remapping the Volkswagen ID.3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Volkswagen ID.3?

Reading and writing via OBD takes 25-30 minutes on the Volkswagen ID.3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Volkswagen ID.3?

Before Stage 1 the original of the Volkswagen ID.3 Pro S 204 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Volkswagen ID.3 Pro S 204 hp cost?

The remap price for the Volkswagen ID.3 Pro S 204 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno