Volkswagen Golf 1.5 TSI 150 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Volkswagen Golf 1.5 TSI 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Golf 1.5 TSI 150 hp ECU
Volkswagen Golf (2017 - VII MKII) 1.5 TSI 150 hp — mass-market petrol engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 150 to 175 hp (+25 hp, +17%) and torque from 250 to 300 Nm (+50 Nm). ECU — Bosch MG1CS011. Flashing method: OBD or Bench depending on the unit's protection. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 4 configurations · 4 ECU variants. A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
TSI / TDI / TGI are VW's badges for petrol / diesel / natural-gas engines respectively. Volkswagen is the parent company of the VAG group (Audi, Skoda, Seat, Cupra, Porsche, Bentley, Lamborghini, Bugatti, Ducati). The VW community is one of the most active in the world for chip tuning. The VW community is one of the most open in Europe, with a large library of ready-made Stage files. R is VW's top performance sub-brand with turbo engines and 4MOTION all-wheel drive. Mid-generation petrol models use standard OBD flash via MQB.
On GTI and R models, Stage 1 works fine on stock hardware. The MQB platform is the most refined chip tuning segment in Europe. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
DSG (Direct Shift Gearbox) is VW's proprietary dual-clutch automated gearbox. The DSG TCU needs calibration for Stage 1+ — the factory torque limiter usually sits below the engine's real capability. The wet DSG is the standard gearbox for R-models and handles significant torque.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Golf 1.5 TSI 150 hp?
Stage 1 chip tuning on the Volkswagen Golf 1.5 TSI 150 hp boosts engine output by 25 hp: from 150 to 175 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What changes in the Volkswagen Golf ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Golf with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Golf 1.5 TSI 150 hp?
A remap of the Volkswagen Golf 1.5 TSI 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Golf 1.5 TSI 150 hp?
Stage 2 for the Volkswagen Golf 1.5 TSI 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Volkswagen Golf 1.5 TSI 150 hp use?
The Volkswagen Golf 1.5 TSI 150 hp is fitted with the Bosch MG1CS011 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Can all the gearbox variants (Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x) on the Volkswagen Golf be calibrated?
The Volkswagen Golf 1.5 TSI 150 hp has 3 TCU variants: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Volkswagen Golf remain valid after Stage 1?
After remapping the Volkswagen Golf, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Golf?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Golf. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Golf?
Before Stage 1 the original of the Volkswagen Golf 1.5 TSI 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Golf 1.5 TSI 150 hp cost?
The remap price for the Volkswagen Golf 1.5 TSI 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.