Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp — Stage 1 file (+34 hp)
hp
Stage 1 file for Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp ECU
Volkswagen Crafter (2011) 2.0 TDI CR (VW-2011) 163 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 163 to 197 hp (+34 hp, +21%) and torque from 400 to 450 Nm (+50 Nm). A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
TSI / TDI / TGI are VW's badges for petrol / diesel / natural-gas engines respectively. Volkswagen is the parent company of the VAG group (Audi, Skoda, Seat, Cupra, Porsche, Bentley, Lamborghini, Bugatti, Ducati). The VW community is one of the most active in the world for chip tuning. The MQB platform lets a single calibration cover VW/Audi/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 VW diesels. Mid-generation diesel models use standard OBD read/write.
ECUs are standardised across VAG, so a single file often fits a dozen different models. The VW community is renowned for its active tuning scene and a huge library of available Stage files. Stage 1 on VW commercial diesels focuses on torque for loaded driving. The MQB platform is the most refined chip tuning segment in Europe. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp?
Stage 1 chip tuning on the Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp boosts engine output by 34 hp: from 163 to 197 hp. Torque rises from 400 to 450 Nm (+50 Nm).
What changes in the Volkswagen Crafter ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Crafter with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +34 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp?
A remap of the Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp?
Stage 2 for the Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Volkswagen Crafter remain valid after Stage 1?
After remapping the Volkswagen Crafter, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Crafter?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Crafter. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Crafter?
Before Stage 1 the original of the Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp cost?
The remap price for the Volkswagen Crafter 2.0 TDI CR (VW-2011) 163 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.