Volkswagen Crafter 2.0 TDI CR 136 hp — Stage 1 file (+49 hp)
hp
Stage 1 file for Volkswagen Crafter 2.0 TDI CR 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Crafter 2.0 TDI CR 136 hp ECU
Volkswagen Crafter (2011) 2.0 TDI CR 136 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 136 to 185 hp (+49 hp, +36%) and torque from 320 to 410 Nm (+90 Nm). This engine ships with different ECU variants: Bosch EDC17C46, Bosch EDC17C54, Bosch EDC17CP14, Bosch EDC17CP20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250E, Temic DQ250F — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 6 ECU variants. The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. TDI is Volkswagen's badge for direct-injection turbo-diesel engines. The MQB platform lets a single calibration cover VW/Audi/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 VW diesels.
APR, Revo and Stage 1+ are the leading tuning brands for VW. ECUs are standardised across VAG, so a single file often fits a dozen different models. The VW community is renowned for its active tuning scene and a huge library of available Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models.
DSG (Direct Shift Gearbox) is VW's proprietary dual-clutch automated gearbox. The DSG TCU needs calibration for Stage 1+ — the factory torque limiter usually sits below the engine's real capability. The wet DSG is the standard gearbox for R-models and handles significant torque.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Crafter 2.0 TDI CR 136 hp?
The Stage 1 gain for the Volkswagen Crafter 2.0 TDI CR 136 hp is 49 hp (+36%) over the stock 136 hp, for a total of 185 hp. Torque rises from 320 to 410 Nm (+90 Nm).
What is Stage 1 chip tuning for the Volkswagen Crafter?
Stage 1 chip tuning of the Volkswagen Crafter is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +49 hp with no hardware changes.
Can you do Stage 1 on the Volkswagen Crafter 2.0 TDI CR 136 hp?
Yes, Stage 1 for the Volkswagen Crafter 2.0 TDI CR 136 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Volkswagen Crafter?
Stage 2 on the Volkswagen Crafter 2.0 TDI CR 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Volkswagen Crafter 2.0 TDI CR 136 hp?
The Volkswagen Crafter 2.0 TDI CR 136 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C46, Bosch EDC17C54, Bosch EDC17CP14, Bosch EDC17CP20. The write method (OBD, Bench, Boot) is determined when the unit is read.
How many TCU units does the Volkswagen Crafter 2.0 TDI CR 136 hp have?
The Volkswagen Crafter 2.0 TDI CR 136 hp comes with 2 different automatic-transmission TCU units: Temic DQ250E, Temic DQ250F. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Volkswagen Crafter warranty after chip tuning?
The factory warranty of the Volkswagen Crafter does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Volkswagen Crafter take?
On the Volkswagen Crafter 2.0 TDI CR 136 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Volkswagen Crafter?
Yes, the original ECU firmware of the Volkswagen Crafter 2.0 TDI CR 136 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Volkswagen Crafter?
Stage 1 for the Volkswagen Crafter 2.0 TDI CR 136 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.