Volkswagen Crafter 2.5 TDI 109 hp — Stage 1 file (+31 hp)
hp
Stage 1 file for Volkswagen Crafter 2.5 TDI 109 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Crafter 2.5 TDI 109 hp ECU
Volkswagen Crafter (2006) 2.5 TDI 109 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 109 to 140 hp (+31 hp, +28%) and torque from 300 to 364 Nm (+64 Nm). The 2006 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The ID line is VW's dedicated series of all-electric models. VAG is Europe's largest automotive group by production volume. Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. VW TDI engines are fitted to both passenger cars and commercial vehicles. TDI is Volkswagen's badge for direct-injection turbo-diesel engines. The MQB platform lets a single calibration cover VW/Audi/Skoda/Seat.
Stage 1 on mid-range VW diesels delivers a noticeable torque gain. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
What power gain do you get after chip tuning the Volkswagen Crafter 2.5 TDI 109 hp?
After Stage 1 the power of the Volkswagen Crafter 2.5 TDI 109 hp rises from 109 to 140 hp, a gain of 31 hp (+28%). Torque rises from 300 to 364 Nm (+64 Nm).
How does Stage 1 differ from stock on the Volkswagen Crafter?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Crafter with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +31 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Crafter 2.5 TDI 109 hp?
A remap of the Volkswagen Crafter 2.5 TDI 109 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Crafter 2.5 TDI 109 hp?
Stage 2 on the Volkswagen Crafter 2.5 TDI 109 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volkswagen Crafter remain valid after Stage 1?
After remapping the Volkswagen Crafter, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Crafter?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Crafter. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Crafter?
Before Stage 1 the original of the Volkswagen Crafter 2.5 TDI 109 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Crafter 2.5 TDI 109 hp cost?
The remap price for the Volkswagen Crafter 2.5 TDI 109 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.