Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp — Stage 1 file (+80 hp)
hp
Stage 1 file for Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp ECU
Volkswagen Coccinelle / Beetle (2011) 2.0 TDI CR EU6 110 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 110 to 190 hp (+80 hp, +73%) and torque from 250 to 350 Nm (+100 Nm). The 2011 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
4MOTION is Volkswagen's proprietary all-wheel-drive system. 'Volkswagen' literally means 'the people's car' — the original philosophy of mass affordability. DSG is the VAG group's proprietary automated gearbox, developed by Volkswagen. Mid-range VW diesels are a high-volume chip tuning subject across Europe. VW TDI engines are fitted to both passenger cars and commercial vehicles. TDI is Volkswagen's badge for direct-injection turbo-diesel engines.
APR, Revo and Stage 1+ are the leading tuning brands for VW. ECUs are standardised across VAG, so a single file often fits a dozen different models. The VW community is renowned for its active tuning scene and a huge library of available Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models.
Frequently asked questions
What is the Stage 1 effect on the Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp?
The Stage 1 gain for the Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp is 80 hp (+73%) over the stock 110 hp, for a total of 190 hp. Torque rises from 250 to 350 Nm (+100 Nm).
What is Stage 1 chip tuning for the Volkswagen Coccinelle / Beetle?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Coccinelle / Beetle with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +80 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp?
A remap of the Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp?
Stage 2 on the Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volkswagen Coccinelle / Beetle remain valid after Stage 1?
After remapping the Volkswagen Coccinelle / Beetle, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Coccinelle / Beetle?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Coccinelle / Beetle. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Coccinelle / Beetle?
Before Stage 1 the original of the Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp cost?
The remap price for the Volkswagen Coccinelle / Beetle 2.0 TDI CR EU6 110 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.