Volkswagen Caddy 2.0 TDI CR 136 hp — Stage 1 file (+49 hp)
hp
Stage 1 file for Volkswagen Caddy 2.0 TDI CR 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Caddy 2.0 TDI CR 136 hp ECU
Volkswagen Caddy (2004 - 2K) 2.0 TDI CR 136 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 136 to 185 hp (+49 hp, +36%) and torque from 320 to 410 Nm (+90 Nm). This engine ships with different ECU variants: Bosch EDC17C46, Bosch EDC17C54, Bosch EDC17CP14, Bosch EDC17CP20. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. TCU units on this engine: Temic DQ250E, Temic DQ250F — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 6 configurations · 6 ECU variants. The 2004 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. 4MOTION is Volkswagen's proprietary all-wheel-drive system. On older VW diesels, Stage 1 is flashed via OBD with no complications. The factory calibration on VW diesels is conservative, leaving headroom for Stage 1. VW's diesel range is fully standardised with Audi, Skoda and Seat within VAG.
Stage 1 on mid-range VW diesels delivers a noticeable torque gain. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
DSG (Direct Shift Gearbox) is VW's proprietary dual-clutch automated gearbox. The DSG TCU needs calibration for Stage 1+ — the factory torque limiter usually sits below the engine's real capability. The wet DSG is the standard gearbox for R-models and handles significant torque.
Frequently asked questions
How much horsepower does Stage 1 add for the Volkswagen Caddy 2.0 TDI CR 136 hp?
After Stage 1 the power of the Volkswagen Caddy 2.0 TDI CR 136 hp rises from 136 to 185 hp, a gain of 49 hp (+36%). Torque rises from 320 to 410 Nm (+90 Nm).
How does Stage 1 differ from stock on the Volkswagen Caddy?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Caddy with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +49 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Caddy 2.0 TDI CR 136 hp?
A remap of the Volkswagen Caddy 2.0 TDI CR 136 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Caddy 2.0 TDI CR 136 hp?
Stage 2 on the Volkswagen Caddy 2.0 TDI CR 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Volkswagen Caddy 2.0 TDI CR 136 hp built with?
The Volkswagen Caddy 2.0 TDI CR 136 hp comes with 4 ECU variants: Bosch EDC17C46, Bosch EDC17C54, Bosch EDC17CP14, Bosch EDC17CP20. Calibration is done for the specific unit after the revision is identified.
Can all the gearbox variants (Temic DQ250E, Temic DQ250F) on the Volkswagen Caddy be calibrated?
The Volkswagen Caddy 2.0 TDI CR 136 hp has 2 TCU variants: Temic DQ250E, Temic DQ250F. Remapping the gearbox is essential after Stage 1 — the factory torque limiter is usually below what the engine can deliver.
Does the factory warranty of the Volkswagen Caddy remain valid after Stage 1?
After remapping the Volkswagen Caddy, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Caddy?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Caddy. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Caddy?
Before Stage 1 the original of the Volkswagen Caddy 2.0 TDI CR 136 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Caddy 2.0 TDI CR 136 hp cost?
The remap price for the Volkswagen Caddy 2.0 TDI CR 136 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.