Volkswagen Bora 1.9 TDI IP 100 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Volkswagen Bora 1.9 TDI IP 100 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Bora 1.9 TDI IP 100 hp ECU
Volkswagen Bora (1997) 1.9 TDI IP 100 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 100 to 140 hp (+40 hp, +40%) and torque from 210 to 300 Nm (+90 Nm). ECU — Bosch EDC15P+. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 1997 — the era of classic Common Rail without strong encryption.
VAG is Europe's largest automotive group by production volume. Volkswagen is Germany's largest carmaker, founded in 1937 in Wolfsburg. GTI and R are Volkswagen's performance sub-brands. VW's commercial segment features the most widely tuned diesels in Europe. The European TDI community is the world's largest for passenger-car diesel chip tuning. Together with Audi, Volkswagen pioneered mass-market TDI passenger-car engines in Europe.
The VW community is renowned for its active tuning scene and a huge library of available Stage files. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved.
Frequently asked questions
How many horsepower does the Volkswagen Bora 1.9 TDI IP 100 hp reach after a remap?
Stage 1 for the Volkswagen Bora 1.9 TDI IP 100 hp adds +40 hp — power increases from 100 to 140 hp (+40%). Torque rises from 210 to 300 Nm (+90 Nm).
What does a Stage 1 remap of the Volkswagen Bora 1.9 TDI IP 100 hp include?
Stage 1 on the Volkswagen Bora 1.9 TDI IP 100 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +40 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.9 TDI IP 100 hp?
Stage 1 on the Volkswagen Bora 1.9 TDI IP 100 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Volkswagen Bora 1.9 TDI IP 100 hp?
Stage 2 for the Volkswagen Bora 1.9 TDI IP 100 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Volkswagen Bora 1.9 TDI IP 100 hp run?
The control unit of the Volkswagen Bora 1.9 TDI IP 100 hp is the Bosch EDC15P+. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Volkswagen Bora?
Stage 1 on the Volkswagen Bora voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Volkswagen Bora 1.9 TDI IP 100 hp done?
The full remap cycle for the Volkswagen Bora — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Volkswagen Bora?
The original Volkswagen Bora ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Volkswagen Bora 1.9 TDI IP 100 hp?
The cost of Stage 1 for the Volkswagen Bora 1.9 TDI IP 100 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.