Volkswagen Amarok 2.0 TDI CR 122 hp — Stage 1 file (+53 hp)
hp
Stage 1 file for Volkswagen Amarok 2.0 TDI CR 122 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volkswagen Amarok 2.0 TDI CR 122 hp ECU
Volkswagen Amarok (2010) 2.0 TDI CR 122 hp — mass-market diesel engine of the passenger segment of the Volkswagen Group (VAG) — материнская компания group (Германия, 1937). Stage 1 chip tuning raises power from 122 to 175 hp (+53 hp, +43%) and torque from 290 to 420 Nm (+130 Nm). The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
DSG is the VAG group's proprietary automated gearbox, developed by Volkswagen. TSI / TDI / TGI are VW's badges for petrol / diesel / natural-gas engines respectively. Volkswagen is the parent company of the VAG group (Audi, Skoda, Seat, Cupra, Porsche, Bentley, Lamborghini, Bugatti, Ducati). VW TDI engines are fitted to both passenger cars and commercial vehicles. TDI is Volkswagen's badge for direct-injection turbo-diesel engines. The MQB platform lets a single calibration cover VW/Audi/Skoda/Seat.
The VW community is renowned for its active tuning scene and a huge library of available Stage files. Stage 1 on VW commercial diesels focuses on torque for loaded driving. Stage 1 on mid-range VW diesels delivers a noticeable torque gain. Mid-range VW engines form the core of the range and take Stage 1 with reliability fully preserved. The VW community offers a large library of ready-made Stage files for mainstream models. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. The MQB platform is the most refined chip tuning segment in Europe.
Frequently asked questions
How many horsepower does the Volkswagen Amarok 2.0 TDI CR 122 hp reach after a remap?
After Stage 1 the power of the Volkswagen Amarok 2.0 TDI CR 122 hp rises from 122 to 175 hp, a gain of 53 hp (+43%). Torque rises from 290 to 420 Nm (+130 Nm).
How does Stage 1 differ from stock on the Volkswagen Amarok?
Stage 1 is a software optimization of the factory ECU firmware of the Volkswagen Amarok with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +53 hp with no hardware changes.
What is the risk of Stage 1 on the Volkswagen Amarok 2.0 TDI CR 122 hp?
A remap of the Volkswagen Amarok 2.0 TDI CR 122 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volkswagen Amarok 2.0 TDI CR 122 hp?
Stage 2 on the Volkswagen Amarok 2.0 TDI CR 122 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volkswagen Amarok remain valid after Stage 1?
After remapping the Volkswagen Amarok, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volkswagen Amarok?
Reading and writing via OBD takes 25-30 minutes on the Volkswagen Amarok. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volkswagen Amarok?
Before Stage 1 the original of the Volkswagen Amarok 2.0 TDI CR 122 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volkswagen Amarok 2.0 TDI CR 122 hp cost?
The remap price for the Volkswagen Amarok 2.0 TDI CR 122 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.