Vinfast Lux SA 2.0 228 hp — Stage 1 file (+32 hp)
hp
Stage 1 file for Vinfast Lux SA 2.0 228 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Vinfast Lux SA 2.0 228 hp ECU
Vinfast Lux SA (2020) 2.0 228 hp — mass-market petrol engine of the passenger segment of the Vingroup group (Вьетнам, 2017). Stage 1 chip tuning raises power from 228 to 260 hp (+32 hp, +14%) and torque from 350 to 400 Nm (+50 Nm). A 2020 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Vinfast is a Vietnamese carmaker founded in 2017, focused on electric vehicles. Vinfast is part of the Vingroup conglomerate. Chinese carmakers are aggressively developing EV and hybrid technology. Vinfast's petrol range consists mainly of mainstream-segment turbo engines. The factory calibration is conservative, leaving headroom for Stage 1. High-output petrol engines power the flagship models.
Protection on modern Chinese models often calls for Bench access on the top variants. The Vinfast community in China and the CIS is a growing chip tuning market. High-output Vinfast models are flagship crossovers with headroom for Stage 1.
Frequently asked questions
What is the Stage 1 effect on the Vinfast Lux SA 2.0 228 hp?
Stage 1 for the Vinfast Lux SA 2.0 228 hp adds +32 hp — power increases from 228 to 260 hp (+14%). Torque rises from 350 to 400 Nm (+50 Nm).
What does a Stage 1 remap of the Vinfast Lux SA 2.0 228 hp include?
Stage 1 on the Vinfast Lux SA 2.0 228 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +32 hp with no hardware changes.
What does Stage 1 give on the powerful Vinfast Lux SA 2.0 228 hp?
Stage 1 on the powerful Vinfast Lux SA 2.0 228 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Vinfast Lux SA 2.0 228 hp?
Stage 2 for the Vinfast Lux SA 2.0 228 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Vinfast Lux SA?
Stage 1 on the Vinfast Lux SA voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Vinfast Lux SA 2.0 228 hp done?
The full remap cycle for the Vinfast Lux SA — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Vinfast Lux SA?
The original Vinfast Lux SA ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Vinfast Lux SA 2.0 228 hp?
The cost of Stage 1 for the Vinfast Lux SA 2.0 228 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.