Valtra XM Series 130 135hp (99kW) 510Nm — Stage 1 file (+33 hp)
hp
Stage 1 file for Valtra XM Series 130 135hp (99kW) 510Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra XM Series 130 135hp (99kW) 510Nm ECU
Valtra XM Series (I) 130 135hp (99kW) 510Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 135 to 168 hp (+33 hp, +24%) and torque from 510 to 605 Nm (+95 Nm).
Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What is the Stage 1 effect on the Valtra XM Series 130 135hp (99kW) 510Nm?
Stage 1 for the Valtra XM Series 130 135hp (99kW) 510Nm adds +33 hp — power increases from 135 to 168 hp (+24%). Torque rises from 510 to 605 Nm (+95 Nm).
What does a Stage 1 remap of the Valtra XM Series 130 135hp (99kW) 510Nm include?
Stage 1 on the Valtra XM Series 130 135hp (99kW) 510Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +33 hp with no hardware changes.
Is a Stage 1 remap safe for the 130 135hp (99kW) 510Nm?
Stage 1 on the Valtra XM Series 130 135hp (99kW) 510Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Valtra XM Series 130 135hp (99kW) 510Nm?
Stage 2 for the Valtra XM Series 130 135hp (99kW) 510Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Valtra XM Series?
Stage 1 on the Valtra XM Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Valtra XM Series 130 135hp (99kW) 510Nm done?
The full remap cycle for the Valtra XM Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Valtra XM Series?
The original Valtra XM Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Valtra XM Series 130 135hp (99kW) 510Nm?
The cost of Stage 1 for the Valtra XM Series 130 135hp (99kW) 510Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.