Valtra T Series T214 7.4 230hp (169kW) 910Nm — Stage 1 file (+32 hp)
hp
Stage 1 file for Valtra T Series T214 7.4 230hp (169kW) 910Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra T Series T214 7.4 230hp (169kW) 910Nm ECU
Valtra T Series (I) T214 7.4 230hp (169kW) 910Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 230 to 262 hp (+32 hp, +14%) and torque from 910 to 1038 Nm (+128 Nm).
Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Valtra — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Valtra T Series T214 7.4 230hp (169kW) 910Nm reach after a remap?
The Stage 1 gain for the Valtra T Series T214 7.4 230hp (169kW) 910Nm is 32 hp (+14%) over the stock 230 hp, for a total of 262 hp. Torque rises from 910 to 1038 Nm (+128 Nm).
What is Stage 1 chip tuning for the Valtra T Series?
Stage 1 chip tuning of the Valtra T Series is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +32 hp with no hardware changes.
Is Stage 1 safe on the high-output Valtra T Series T214 7.4 230hp (169kW) 910Nm?
The high-output Valtra T Series T214 7.4 230hp (169kW) 910Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the Valtra T Series?
Stage 2 on the Valtra T Series T214 7.4 230hp (169kW) 910Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What happens to the Valtra T Series warranty after chip tuning?
The factory warranty of the Valtra T Series does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Valtra T Series take?
On the Valtra T Series T214 7.4 230hp (169kW) 910Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Valtra T Series?
Yes, the original ECU firmware of the Valtra T Series T214 7.4 230hp (169kW) 910Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Valtra T Series?
Stage 1 for the Valtra T Series T214 7.4 230hp (169kW) 910Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.