Valtra T Series T194 7.4 210hp (154kW) 870Nm — Stage 1 file (+28 hp)
hp
Stage 1 file for Valtra T Series T194 7.4 210hp (154kW) 870Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra T Series T194 7.4 210hp (154kW) 870Nm ECU
Valtra T Series (I) T194 7.4 210hp (154kW) 870Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 210 to 238 hp (+28 hp, +13%) and torque from 870 to 986 Nm (+116 Nm).
Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Valtra — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Valtra T Series T194 7.4 210hp (154kW) 870Nm reach after a remap?
Stage 1 chip tuning on the Valtra T Series T194 7.4 210hp (154kW) 870Nm boosts engine output by 28 hp: from 210 to 238 hp. Torque rises from 870 to 986 Nm (+116 Nm).
What changes in the Valtra T Series ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Valtra T Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +28 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Valtra T Series?
Stage 1 on the powerful Valtra T Series T194 7.4 210hp (154kW) 870Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Valtra T Series T194 7.4 210hp (154kW) 870Nm?
Stage 2 for the Valtra T Series T194 7.4 210hp (154kW) 870Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Valtra T Series remain valid after Stage 1?
After remapping the Valtra T Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Valtra T Series?
Reading and writing via OBD takes 25-30 minutes on the Valtra T Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Valtra T Series?
Before Stage 1 the original of the Valtra T Series T194 7.4 210hp (154kW) 870Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Valtra T Series T194 7.4 210hp (154kW) 870Nm cost?
The remap price for the Valtra T Series T194 7.4 210hp (154kW) 870Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.