Valtra T Series 213 7.4 215hp (158kW) 850Nm — Stage 1 file (+45 hp)
hp
Stage 1 file for Valtra T Series 213 7.4 215hp (158kW) 850Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra T Series 213 7.4 215hp (158kW) 850Nm ECU
Valtra T Series (I) 213 7.4 215hp (158kW) 850Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 215 to 260 hp (+45 hp, +21%) and torque from 850 to 950 Nm (+100 Nm).
Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Высокомощные Valtra — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Valtra T Series 213 7.4 215hp (158kW) 850Nm?
Stage 1 chip tuning on the Valtra T Series 213 7.4 215hp (158kW) 850Nm boosts engine output by 45 hp: from 215 to 260 hp. Torque rises from 850 to 950 Nm (+100 Nm).
What changes in the Valtra T Series ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Valtra T Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +45 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Valtra T Series?
Stage 1 on the powerful Valtra T Series 213 7.4 215hp (158kW) 850Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Valtra T Series 213 7.4 215hp (158kW) 850Nm?
Stage 2 for the Valtra T Series 213 7.4 215hp (158kW) 850Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Valtra T Series remain valid after Stage 1?
After remapping the Valtra T Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Valtra T Series?
Reading and writing via OBD takes 25-30 minutes on the Valtra T Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Valtra T Series?
Before Stage 1 the original of the Valtra T Series 213 7.4 215hp (158kW) 850Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Valtra T Series 213 7.4 215hp (158kW) 850Nm cost?
The remap price for the Valtra T Series 213 7.4 215hp (158kW) 850Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.