Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm — Stage 1 file (+44 hp)
hp
Stage 1 file for Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm ECU
Valtra T Series (I) 202 6.6 Versu 192hp (141kW) 800Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 192 to 236 hp (+44 hp, +23%) and torque from 800 to 1005 Nm (+205 Nm).
Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm increase after Stage 1?
Stage 1 for the Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm adds +44 hp — power increases from 192 to 236 hp (+23%). Torque rises from 800 to 1005 Nm (+205 Nm).
What does a Stage 1 remap of the Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm include?
Stage 1 on the Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +44 hp with no hardware changes.
Is a Stage 1 remap safe for the 202 6.6 Versu 192hp (141kW) 800Nm?
Stage 1 on the Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm?
Stage 2 for the Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Valtra T Series?
Stage 1 on the Valtra T Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm done?
The full remap cycle for the Valtra T Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Valtra T Series?
The original Valtra T Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm?
The cost of Stage 1 for the Valtra T Series 202 6.6 Versu 192hp (141kW) 800Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.