Valtra T Series 190 211hp (155kW) 830Nm — Stage 1 file (+49 hp)
hp
Stage 1 file for Valtra T Series 190 211hp (155kW) 830Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra T Series 190 211hp (155kW) 830Nm ECU
Valtra T Series (I) 190 211hp (155kW) 830Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 211 to 260 hp (+49 hp, +23%) and torque from 830 to 990 Nm (+160 Nm).
Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Valtra — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What is the Stage 1 effect on the Valtra T Series 190 211hp (155kW) 830Nm?
Stage 1 for the Valtra T Series 190 211hp (155kW) 830Nm adds +49 hp — power increases from 211 to 260 hp (+23%). Torque rises from 830 to 990 Nm (+160 Nm).
What does a Stage 1 remap of the Valtra T Series 190 211hp (155kW) 830Nm include?
Stage 1 chip tuning of the Valtra T Series is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +49 hp with no hardware changes.
Is Stage 1 safe on the high-output Valtra T Series 190 211hp (155kW) 830Nm?
Stage 1 on the powerful Valtra T Series 190 211hp (155kW) 830Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How much does Stage 2 add on the Valtra T Series?
Stage 2 for the Valtra T Series 190 211hp (155kW) 830Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What happens to the Valtra T Series warranty after chip tuning?
The factory warranty of the Valtra T Series does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Valtra T Series take?
On the Valtra T Series 190 211hp (155kW) 830Nm: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Valtra T Series?
Yes, the original ECU firmware of the Valtra T Series 190 211hp (155kW) 830Nm is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Valtra T Series?
Stage 1 for the Valtra T Series 190 211hp (155kW) 830Nm is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.