Valtra T Series 180 175hp (129kW) 660Nm — Stage 1 file (+41 hp)
hp
Stage 1 file for Valtra T Series 180 175hp (129kW) 660Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra T Series 180 175hp (129kW) 660Nm ECU
Valtra T Series (I) 180 175hp (129kW) 660Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 175 to 216 hp (+41 hp, +23%) and torque from 660 to 785 Nm (+125 Nm).
Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Valtra T Series 180 175hp (129kW) 660Nm?
Stage 1 chip tuning on the Valtra T Series 180 175hp (129kW) 660Nm boosts engine output by 41 hp: from 175 to 216 hp. Torque rises from 660 to 785 Nm (+125 Nm).
What changes in the Valtra T Series ECU after Stage 1?
Stage 1 on the Valtra T Series 180 175hp (129kW) 660Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +41 hp with no hardware changes.
Is a Stage 1 remap safe for the 180 175hp (129kW) 660Nm?
Stage 1 on the Valtra T Series 180 175hp (129kW) 660Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Valtra T Series 180 175hp (129kW) 660Nm?
Stage 2 for the Valtra T Series 180 175hp (129kW) 660Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Valtra T Series?
Stage 1 on the Valtra T Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Valtra T Series 180 175hp (129kW) 660Nm done?
The full remap cycle for the Valtra T Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Valtra T Series?
The original Valtra T Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Valtra T Series 180 175hp (129kW) 660Nm?
The cost of Stage 1 for the Valtra T Series 180 175hp (129kW) 660Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.