Valtra T Series 173 7.4 180hp (132kW) 660Nm — Stage 1 file (+558 hp)
hp
Stage 1 file for Valtra T Series 173 7.4 180hp (132kW) 660Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra T Series 173 7.4 180hp (132kW) 660Nm ECU
Valtra T Series (I) 173 7.4 180hp (132kW) 660Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 180 to 738 hp (+558 hp, +310%) and torque from 660 to 215 Nm (+-445 Nm).
Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Valtra T Series 173 7.4 180hp (132kW) 660Nm reach after a remap?
Stage 1 for the Valtra T Series 173 7.4 180hp (132kW) 660Nm adds +558 hp — power increases from 180 to 738 hp (+310%). Torque rises from 660 to 215 Nm (+-445 Nm).
What does a Stage 1 remap of the Valtra T Series 173 7.4 180hp (132kW) 660Nm include?
Stage 1 on the Valtra T Series 173 7.4 180hp (132kW) 660Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +558 hp with no hardware changes.
Is a Stage 1 remap safe for the 173 7.4 180hp (132kW) 660Nm?
Stage 1 on the Valtra T Series 173 7.4 180hp (132kW) 660Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Valtra T Series 173 7.4 180hp (132kW) 660Nm?
Stage 2 for the Valtra T Series 173 7.4 180hp (132kW) 660Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Valtra T Series?
Stage 1 on the Valtra T Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Valtra T Series 173 7.4 180hp (132kW) 660Nm done?
The full remap cycle for the Valtra T Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Valtra T Series?
The original Valtra T Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Valtra T Series 173 7.4 180hp (132kW) 660Nm?
The cost of Stage 1 for the Valtra T Series 173 7.4 180hp (132kW) 660Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.