Valtra T Series 153 6.6 155hp (114kW) 640Nm — Stage 1 file (+30 hp)
hp
Stage 1 file for Valtra T Series 153 6.6 155hp (114kW) 640Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra T Series 153 6.6 155hp (114kW) 640Nm ECU
Valtra T Series (I) 153 6.6 155hp (114kW) 640Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 155 to 185 hp (+30 hp, +19%) and torque from 640 to 714 Nm (+74 Nm).
Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much does the power of the Valtra T Series 153 6.6 155hp (114kW) 640Nm increase after Stage 1?
The Stage 1 gain for the Valtra T Series 153 6.6 155hp (114kW) 640Nm is 30 hp (+19%) over the stock 155 hp, for a total of 185 hp. Torque rises from 640 to 714 Nm (+74 Nm).
What is Stage 1 chip tuning for the Valtra T Series?
Stage 1 on the Valtra T Series 153 6.6 155hp (114kW) 640Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +30 hp with no hardware changes.
Is a Stage 1 remap safe for the 153 6.6 155hp (114kW) 640Nm?
Stage 1 on the Valtra T Series 153 6.6 155hp (114kW) 640Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Valtra T Series 153 6.6 155hp (114kW) 640Nm?
Stage 2 on the Valtra T Series 153 6.6 155hp (114kW) 640Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Valtra T Series?
Stage 1 on the Valtra T Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Valtra T Series 153 6.6 155hp (114kW) 640Nm done?
The full remap cycle for the Valtra T Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Valtra T Series?
The original Valtra T Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Valtra T Series 153 6.6 155hp (114kW) 640Nm?
The cost of Stage 1 for the Valtra T Series 153 6.6 155hp (114kW) 640Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.