Valtra T Series 150 155hp (114kW) 625Nm — Stage 1 file (+23 hp)
hp
Stage 1 file for Valtra T Series 150 155hp (114kW) 625Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra T Series 150 155hp (114kW) 625Nm ECU
Valtra T Series (I) 150 155hp (114kW) 625Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 155 to 178 hp (+23 hp, +15%) and torque from 625 to 696 Nm (+71 Nm).
Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
What power gain do you get after chip tuning the Valtra T Series 150 155hp (114kW) 625Nm?
The Stage 1 gain for the Valtra T Series 150 155hp (114kW) 625Nm is 23 hp (+15%) over the stock 155 hp, for a total of 178 hp. Torque rises from 625 to 696 Nm (+71 Nm).
What is Stage 1 chip tuning for the Valtra T Series?
Stage 1 is a software optimization of the factory ECU firmware of the Valtra T Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +23 hp with no hardware changes.
What is the risk of Stage 1 on the Valtra T Series 150 155hp (114kW) 625Nm?
A remap of the Valtra T Series 150 155hp (114kW) 625Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Valtra T Series 150 155hp (114kW) 625Nm?
Stage 2 on the Valtra T Series 150 155hp (114kW) 625Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Valtra T Series remain valid after Stage 1?
After remapping the Valtra T Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Valtra T Series?
Reading and writing via OBD takes 25-30 minutes on the Valtra T Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Valtra T Series?
Before Stage 1 the original of the Valtra T Series 150 155hp (114kW) 625Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Valtra T Series 150 155hp (114kW) 625Nm cost?
The remap price for the Valtra T Series 150 155hp (114kW) 625Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.