Valtra T Series 140e 146hp (107kW) 655Nm — Stage 1 file (+36 hp)
hp
Stage 1 file for Valtra T Series 140e 146hp (107kW) 655Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra T Series 140e 146hp (107kW) 655Nm ECU
Valtra T Series (I) 140e 146hp (107kW) 655Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 146 to 182 hp (+36 hp, +25%) and torque from 655 to 783 Nm (+128 Nm).
Valtra specialises in tractors built for Nordic conditions. Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Valtra T Series 140e 146hp (107kW) 655Nm?
The Stage 1 gain for the Valtra T Series 140e 146hp (107kW) 655Nm is 36 hp (+25%) over the stock 146 hp, for a total of 182 hp. Torque rises from 655 to 783 Nm (+128 Nm).
What is Stage 1 chip tuning for the Valtra T Series?
Stage 1 on the Valtra T Series 140e 146hp (107kW) 655Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +36 hp with no hardware changes.
Is a Stage 1 remap safe for the 140e 146hp (107kW) 655Nm?
Stage 1 on the Valtra T Series 140e 146hp (107kW) 655Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Valtra T Series 140e 146hp (107kW) 655Nm?
Stage 2 on the Valtra T Series 140e 146hp (107kW) 655Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Valtra T Series?
Stage 1 on the Valtra T Series voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Valtra T Series 140e 146hp (107kW) 655Nm done?
The full remap cycle for the Valtra T Series — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Valtra T Series?
The original Valtra T Series ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Valtra T Series 140e 146hp (107kW) 655Nm?
The cost of Stage 1 for the Valtra T Series 140e 146hp (107kW) 655Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.