Valtra N Series N114E 4.4 125hp (92kW) 570Nm — Stage 1 file (+35 hp)
hp
Stage 1 file for Valtra N Series N114E 4.4 125hp (92kW) 570Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Valtra N Series N114E 4.4 125hp (92kW) 570Nm ECU
Valtra N Series (I) N114E 4.4 125hp (92kW) 570Nm — agricultural diesel engine of the agricultural segment of the AGCO Corporation group (Финляндия, 1951). Stage 1 chip tuning raises power from 125 to 160 hp (+35 hp, +28%) and torque from 570 to 690 Nm (+120 Nm).
Valtra is a Finnish tractor manufacturer, founded in 1951. Valtra is part of AGCO Corporation. Valtra specialises in tractors built for Nordic conditions. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 на агро-дизелях — заметный прирост момента для тяги. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Valtra среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Valtra N Series N114E 4.4 125hp (92kW) 570Nm reach after a remap?
Stage 1 for the Valtra N Series N114E 4.4 125hp (92kW) 570Nm adds +35 hp — power increases from 125 to 160 hp (+28%). Torque rises from 570 to 690 Nm (+120 Nm).
What does a Stage 1 remap of the Valtra N Series N114E 4.4 125hp (92kW) 570Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the Valtra N Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Valtra N Series N114E 4.4 125hp (92kW) 570Nm?
A remap of the Valtra N Series N114E 4.4 125hp (92kW) 570Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Valtra N Series N114E 4.4 125hp (92kW) 570Nm?
Stage 2 for the Valtra N Series N114E 4.4 125hp (92kW) 570Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Valtra N Series remain valid after Stage 1?
After remapping the Valtra N Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Valtra N Series?
Reading and writing via OBD takes 25-30 minutes on the Valtra N Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Valtra N Series?
Before Stage 1 the original of the Valtra N Series N114E 4.4 125hp (92kW) 570Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Valtra N Series N114E 4.4 125hp (92kW) 570Nm cost?
The remap price for the Valtra N Series N114E 4.4 125hp (92kW) 570Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.